Tiedown Engineering

Tiedown Engineering Chain Holder Injin 26410J. Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/4", 3/8" and 1/2" chain. 5"L x 5"H.

Tiedown Engineering Washer Plate Commercial Grade 26409I. Should be used with every Angle. Two required for each Angle. 1-1/2"L x 5"H.

Tiedown Engineering Male T Connector Inhin 26408H. Use with Female T connector to attach fingers and ramps. Bolt set "N" required for joint.

Tiedown Engineering Female T Connector Ingin 26407G. Bolts to side of dock to attach fingers and ramps.

Tiedown Engineering Angle 2-1/2".Lx5".H Comm. 26406F. Should be used for all cross supports.

Tiedown Engineering HD Inside Corner 2" Inein 26405E. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set "M" for attaching.

Tiedown Engineering Hdinside Corner 3" Inein 26404E. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set "M" for attaching.

Tiedown Engineering HD Inside Corner Indin 26403D. Should be used with one of the outside corners. Each leg has elongated holes for easy fit.

Tiedown Engineering HD Outside Corner (End) Incin 26402C. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners.

Tiedown Engineering Inside Corner Sq Holes 26401D. Should be used with one of the outside corners. Each leg has elongated holes for easy fit.

Tiedown Engineering HD Outside Corner (Female) Ina 26400A. Two 1/2" welded tabs. Use with a male outside corner.Each leg is 10"L x 5"H.

Tiedown Engineering Angle Brackets 3X3 Sq Holes 26399F. Should be used for all cross supports.

Tiedown Engineering Angle Brackets 3X5 26398F. Should be used for all cross supports.

Tiedown Engineering Angle Brackets 4X8 26397F. Should be used for all cross supports.

Tiedown Engineering Piling Hoop 12 26394Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416).

Tiedown Engineering Piling Hoop 14 26393Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416).

Tiedown Engineering Angle Brackets 3X3 26392F. Should be used for all cross supports.

Tiedown Engineering Piling Hoop 10 26391Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416).

Tiedown Engineering Angle Brackets 4X7 26380F. Should be used for all cross supports.

Tiedown Engineering O/S Corner Male 10 25491B. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set (N) or connector pin (O). Each leg is 10"L x 5" H.

Tiedown Engineering Dock Hdw Lag Bolt 3/8X5 8/Bag 24292Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system.

Tiedown Engineering Dock Hdw Lag Bolt 3/8X3 8/Bag 24289Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system.

Tiedown Engineering Lag Bolt with Wash 3/8X 2-8/Bg 24287Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system.

Tiedown Engineering Washer Plate-Standard Grade 24284I. Should be used with every Angle. Two required for each Angle. 1-1/2"L x 5"H.

Tiedown Engineering Pipe Holder-Outside 3" Std 24280K. Bolts to outside of dock. Uses 2" pipe to hold dock in place. Carriage bolt set "M" required for attaching.

Tiedown Engineering Dock Hdw (N) Hex Head 8/Bag 24279N. Includes lock nut. Used to connect male and female connectors.Galvanized 3/4" x 3-1/2".