Plumbing Fittings

Sea-Dog Line Pipe Deck Fill 1-1/2 SS Gas 351350-1Investment Cast 316 StainlessCap threads are 1-1/2" - 12 NPSM -straightGas, diesel and water caps include attachment chainsFasteners: #10 FH

Sea-Dog Line Thru-Hull Fitting 1 1/8" 520770-1Injection molded polypropylene.

Seachoice 90 Deg Elbow White 3/4 I.D.Hos 18211 Can be used for plumbing or aerator systemsMade of white high impact plastic for corrosion resistance.

Seachoice Baitwell Plug-3/8 -Brass 50-18931 For use in livewells or baitwellsStainless steel top and bottom plateBrass camNeoprene body.

Seachoice Drain Plug-1 Snap-Stainless 50-18901 Rugged construction for durabilityMount from inside transomBulk items come in reusable bucket. • Twist-Turn Plugs: Fully adjustable, will not leak or jar loose. • Snap-Lock...

Seachoice Gas Fill Nylon 1 1/2 Hose 32091 32011: Chrome Plated ZincHas grounding screwLength 1-7/8"Overall OD 3-1/8" • Mount w/#6 screws. • 32041: Chrome Plated ZincCap is marked "GAS"Rubber gasket for secure...

Sherwood Pump P Seastrain 3/4 (Bracket Is 1424 18001Designed to deliver full flow of liquid at ultra low pressure differential while providing effective filtration. Stainless steel screen provides a large ratio of screen area to port size. Clear bowl...

Attwood Marine Deck Fill 1.5 Gas 66406-5316 stainless steel for 1-1/2" hose. Imprinted with "Gasoline". Flush cap is slotted for a key and is O-ring sealed. Cap is attached by a SS beaded chain. 3-1/4" long fill neck. 2 year warranty.

Attwood Marine Thru Hull SS 1-1/8" Short 66543-3Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

Attwood Marine Thru-Hull 3/4" 3873-3Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.

1" 90 Degree Hose Thru-Hull Fitting  Features: 90 Degree Barb #316 Stainless Steel Thru Hull with Bronze Hose Connection UL Listed 647B

1" NPT x 1" ID Bronze Pipe to Hose Straight Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended...

1-1/2" NPT x 1-3/4" Bronze Full Flow Pipe to Hose Straight Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are...

2" Bronze Tri-Flanged Ball Valve/Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug The zerk can also be used for draining Field reversible handle...

2" NPT #316 Stainless Steel In-Line Ball Valve Features: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle has square hole to accept standard ratchet (helps you to...

3" NPT Bronze 90 Degree Pipe to Hose Fitting Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not...

3/4" Bronze NPS to NPT Flange AdapterIBVF Flanged Adapters have been developed to address several common problems in the marine industry.  Features:  Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hullsAccept...

3/4" NPT #316 Stainless Steel In-Line Ball ValveFeatures:1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for drainingHandle has square hole to accept standard ratchet (helps you to...

2" Raw Water Strainer with #304 SS Basket Features: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options #304 SS (Standard) Monel Non-Metallic One-Piece Molded Sight Glass...

Backing Block for 2" & 2-1/2" Seacocks Features: Each size fits multiple seacock sizes Press threaded brass inserts into the hull side of the backing block into the holes that match the seacock flange Rigid 1/2" thickness provides secure...