Plumbing

1-1/2" NPS NPT Combo Bronze Thru-Hull Fitting with Nut Features: NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 5" UL Listed 647B Available with (-W) or without nut (-L) BSPP and Stainless Steel models available

1-1/2" NPT Bronze In-Line Ball ValveFeatures:Female NPT Threads1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for drainingSelectable handle rotationHandle has square hole to accept...

1-1/4" NPT Bronze 45 Degree Pipe to Hose Fitting Features: 45 degree Male NPT x Hose connection C83600 Bronze Sizes from 3/4" to 3" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are...

3" NPT Bronze 45 Degree Pipe to Hose Fitting Features: 45 degree Male NPT x Hose connection C83600 Bronze Sizes from 3/4" to 3" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not...

3/4" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and mount...

3/4" NPS NPT Combo Bronze Thru-Hull Fitting with Nut Features: NPSM / NPT combination thread C83600 Bronze Sizes from 1/2" to 5" UL Listed 647B Available with (-W) or without nut (-L) BSPP and Stainless Steel models available

ARG-2500 Series 2-1/2" Raw Water Strainer Stainless Steel Basket Features: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options #304 SS (Standard) Monel Non-Metallic ...

Bronze Pipe Nipple - 2" NPT  Features: Cast-in wrench flat simplifies installation and removal NPT x NPT Connection C83600 Bronze   Full flow   Note-C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended...

1-1/2" NPS NPT Combo Flush Thru Hull Features: Machined flat face for flush mount or dripless applications NPSM / NPT combination thread C84400 Bronze Sizes from 1/2" to 5" Available with or without nut

Perko 1-1/4 90 Deg Pipe/Hose Adapte 0063Dp7PlbCast bronze. Meets requirements of USCG safety standards. UL Listed.

Rule 800gph Motor 46Dr

Sea-Dog Line Fresh Water Inlet SS 513110-1Designed to provide a fresh water hookup to a pressurized water system while moored. Has standard female swivel hose connector. Complete with black plastic, water tight plug when not connected to on shore water...

Sea-Dog Line Thru-Hull Fitting 3/4" 520750-1Injection molded polypropylene.

Seachoice 90 Deg Elbow White 1 1/8 I.D18221 Can be used for plumbing or aerator systemsMade of white high impact plastic for corrosion resistance.

Seachoice Thru Hull W/SS Cover-1 1/8 90 50-18561 Molded from polypropylene with glass fiber for strengthNot recommended for use below the waterline.

Shurflo Elbow Fitting 1/2 x 3/4 244-3946Accommodates all SHURFLO demand pumps with 1/2" MPT. Hand tighten.

Trident Hose Clamps T-Bolt 1-7/8-2" 7202000Used with hose, elbows and bellows. 3/4" wide. 316 stainless steel band & 18-8 stainless steel T-bolt & lock nut (w/nylon insert). Very strong & secure for critical applications.

Attwood Marine Thru Hull 1-1/2" White 3875-3Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.

1" NPT x 1" ID Bronze 90 Degree Pipe to Hose Fitting Standard Flow Elbow Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61...

1-1/2" NPS NPT Combo XL Bronze Thru Hull Features: Extra long NPSM / NPT combination thread C83600 Bronze Sizes from 3/4" to 2" Available with or without nut Stainless Steel models availab