West System Products

420 Aluminum Powder will increase the hardness and abrasion resistance of the coated surface and improve its moisture resistance. 420 provides limited protection from ultraviolet light in areas that will not be protected with other coatings and can be...

Woven E-glass fabrics are ideal for building epoxy-composite laminates and repairing fiberglass structures along with epoxy. May also be used with epoxy to provide an abrasion-resistant covering for wooden structures. When wet out with epoxy, the 4 and 6...

Repair cracks and scrapes, gelcoat blisters, loose hardware, delaminated decks and panels, damaged keels and holes up to 1″ diameter in solid laminates up to ¼” thick, and smaller holes in thicker laminates. Each Fiberglass...

G/flex Thickened Epoxy Adhesive is a toughened, versatile, 2-part epoxy for permanent waterproof bonding of plastic, fiberglass, ceramics, metals, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, G/flex 650 is a bit more...

205 Fast Hardener is a medium-viscosity epoxy curing agent. It is useful in a majority of bonding situations, and at lower temperatures. 205 Fast Hardener produces a rapid epoxy cure that develops physical properties quickly at room temperature. Mix it...

206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures. When combined with 105 Resin in a five-part epoxy...

209 Extra Slow Hardener is formulated for use with WEST SYSTEM 105 Resin for general coating and bonding applications in extremely warm and/or humid conditions or when extended working time is desired at room temperature. Provides approximately...

Fillable Caulking Tubes are designed for use with a standard caulking gun. Great for injecting large amounts of WEST SYSTEM Epoxy, laying a lengthy bead of epoxy, making fillets, or injecting epoxy into holes as in hardware bonding,...

G/flex Thickened Epoxy Adhesive is a toughened, versatile, 2-part epoxy for permanent waterproof bonding of plastic, fiberglass, ceramics, metals, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, G/flex 650 is a bit more...

Handy Repair Pack Everything you need to complete small repairs around the boat, shop or home. The Handy Repair Pack contains two WEST SYSTEM 105 Resin/205 Fast Hardener packets, and enough adhesive filler to complete a variety of...

879-2 and 879-10 are the same tough, finely woven nylon fabric (often called peel ply). It is used to separate the breather and vacuum bag from the laminate in vacuum bagging operations. Excess epoxy bleeds through and is peeled from the cured...

879-2 and 879-10 are the same tough, finely woven nylon fabric (often called peel ply). It is used to separate the breather and vacuum bag from the laminate in vacuum bagging operations. Excess epoxy bleeds through and is peeled from the cured...

105 Epoxy Resin is the base material on which all WEST SYSTEM 105 System epoxy compounds are built. It is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with hardener at the proper ratio, it cures to a hard, solid plastic with...

801-HD Roller Frame is a 3″ caged frame that holds 7″ full-width 800 Roller Covers as well covers cut to narrower widths for epoxy coating in tight spaces.   How to save your Roller Frame When you’ve completed a coating...

Woven E-glass fabrics are ideal for building epoxy-composite laminates and repairing fiberglass structures along with epoxy. May also be used with epoxy to provide an abrasion-resistant covering for wooden structures. When wet out with epoxy, the 4 and 6...

Woven E-glass fabrics are ideal for building epoxy-composite laminates and repairing fiberglass structures along with epoxy. May also be used with epoxy to provide an abrasion-resistant covering for wooden structures. When wet out with epoxy, the 4 and 6...

Versatile West System 9 oz woven E-glass fabric tapes, with bound edges, are ideal for reinforcing chines, hull/deck corners, and similar structural applications. When bonded with WEST SYSTEM Epoxy, they provide additional tensile strength to resist...

While WEST SYSTEM Epoxy creates an excellent moisture barrier by itself, 422 Barrier Coat Additive is a proprietary blend designed to further improve cured epoxy’s moisture exclusion effectiveness. 422 is used as a barrier coating additive to help...

Breather Fabric is a lightweight, polyester blanket that provides excellent air passage within the vacuum envelope while it absorbs excess epoxy. 881-10  Breather Fabric, 45″ wide x 10 yd roll   Vacuum Bagging Techniques...

406 Colloidal Silica is an epoxy thickening additive used to control the viscosity of the epoxy. It prevents epoxy runoff in vertical and overhead joints. This is a very strong filler. It creates a smooth mixture, ideal for general epoxy bonding and...