Outboard Motor Brackets

Panther Hydraulic O/B Motor Bracket 550045This electro - hydraulic bracket totally eliminates the stress and strain of raising and lowering your auxiliary motor. With 15.5" of vertical lift you can set your motor to exactly the right height with the push...

Panther O/B Bracket Alum Fixed 25 Hp 550027Heavy duty aluminum bracket. Black anodized finish. Designed to hold 2 and 4 stroke motors weighing up to 150 lbs. 5" high adjustment to accommodate short shaft motors.

Panther O/B Bracket Swim Platform 15 Hp 55 - 0030Adjustable outboard motor bracket designed to mount on most swim platforms. Rated for 2 - and 4 - stroke. Constructed of hard - coat anodized aluminum and can be adjusted to fit most platform heights and...

Panther 2 Set Back Plate/Spacer 550220Cast aluminum spacer provides 2" of setback for bolt - on motors. Made of 713 cast aluminum, dipped in a zinc rich primer then powder coated. This solid spacer installs directly on the transom or adds additional...

Panther Auxiliary Motor Bracket - Fixed Model 435 550435Durable non - powered auxiliary bracket. Adjustable to 7.5" and 13" setback options. Can be upgraded to a electro - mechanical tilt unit at any time. Allows, jet or high side outboard applications.

Panther O/B Bracket - Aluminum Adjustable 15hp 4St 550407AlAdjustable, heavy duty outboard motor brackets are built to handle the increased torque of today's motors. They will handle 4 - stroke motors up to 15hp or 2 - stroke motors up to 20hp. Features...

Panther O/B Bracket - SS Adjustable 15hp 4St 550408SSAdjustable, heavy duty outboard motor brackets are built to handle the increased torque of today's motors. They will handle 4 - stroke motors up to 15hp or 2 - stroke motors up to 20hp. Features Twist...

Panther O/B Bracket - SS Fixed 12hp 85Lb 550024Vertical transom mount bracket. Each stainless steel bracket measures 8 - 1/2" long by 6 - 1/8" wide. Holes in poly board are pre - drilled for quick assembly of bracket.

Panther O/B Bracket 2 - Stroke SS 20hp 550020AThis adjustable outboard motor bracket is designed for motors up to 20hp or 115 lbs. Stainless steel construction. Can be adjusted for use on positive angle transoms. Unit is spring loaded with 11" of travel...

Panther O/B Bracket 4 - Stroke 10 Lift 550410The black anodized aluminum bracket is built to handle the increased weight and torque of today's 4 - strokes with long or short shafts. Hand - adjustable with just the turn of a knob, stainless steel torsion...

Panther O/B Bracket 4 - Stroke 16 Lift 550416The black anodized aluminum bracket is built to handle the increased weight and torque of today's 4 - strokes with long or short shafts. Hand - adjustable with just the turn of a knob, stainless steel torsion...

Panther O/B Motor Bracket Aluminum 20hp 550021Heavy - duty, light weight aluminum, adjustable motor brackets are designed for fresh water use on both power and sail boats. Manual operation. Unit is spring loaded to make lifting easier.Motor pad is 8.5 x...

Panther Outboard Motor Bracket - Aluminum - 12hp 550012Heavy - duty, light weight aluminum, adjustable motor brackets are designed for fresh water use on both power and sail boats. Manual operation. Unit is spring loaded to make lifting easier.Motor pad...

Panther Outboard Motor Bracket SS 10hp 550010Adjustable O/B motor bracket features a stainless bracket for years of dependable fresh or saltwater operation. 8. - 1/2" x 10 - 1/2" mounting pad. for 2 - Stroke motors only, Not recommended for 4 - Stroke...