On Sale
Related Products
On Sale
New OEM MerCruiser Bravo 2 X Outdrive 1.81 2.00 2.20
Mercury Marine / Quicksilver
$14,207.00
$11,999.00
Brand New OEM MerCruiser Bravo 2 x outdrive!
100% real, current model, directly from Mercury
Factory warranty (1 year parts and labor, 3 years corrosion)
On Sale
New OEM Mercury MerCruiser Bravo 3 Outdrive 1.81 2.00 2.20
Mercury Marine / Quicksilver
$11,071.00
$8,999.00
Brand New OEM MerCruiser Bravo 3 outdrive!
100% real, current model, directly from Mercury.
Full Factory...
On Sale
New OEM MerCruiser Bravo 3 X Outdrive Sterndrive 1.81 2.00 2.20
Mercury Marine / Quicksilver
$14,207.00
$11,999.00
Brand New OEM MerCruiser Bravo 3 X outdrive!
100% real, current model, directly from Mercury
Factory warranty(1 year parts and labor, 3 years corrosion)
Sold out - Special order may be available, please call 856-232-6969 ext1
CPO OEM MerCruiser Bravo 3 X Outdrive Sterndrive 1.81 2.00 2.20
Mercury Marine / Quicksilver
$14,207.00
$8,500.00
Certified Pre Owned OEM MerCruiser Bravo 3 X outdrive!
100% real, current model, directly from Mercury
Factory warranty(1 year parts and labor, 3 years corrosion)
OEM CPO Mercury MerCruiser Bravo 3 Outdrive Drive 1.81 2.00 2.20
Mercury Marine / Quicksilver
$8,487.50
$7,899.00
"Certified Pe Owned" by mercury OEM MerCruiser Bravo 3 outdrive!
What is CPO?
CPO drives are drives that went back to the factory for a minor issue when they were now. The drives are repaired by...
Description
Brand New OEM MerCruiser Bravo 2 outdrive!
Factory warranty (1 year parts and labor, 3 years corrosion)
Replaces OEM part numbers: 714-5-5331600tp, 714-5-5331400lp, 714-5-5331600lp, 714-5-5331500lp, 714-5-5331400t, 714-5-5331500tp
Prop and transom assy. sold separately.
| Maximum Power Capacity | 400 HP (294 kW) |
|---|---|
| Lower Unit Design | Extended Length Strut |
| Maximum Propeller Diameter | 1 X 20" |
| Water Inlet Location | Strut |
| Clutch Type | High-Strength Smooth-Shift Cone Clutch with F-N-R |
| Available Gear Ratios | 1.81, 2.00, 2.20:1 |
| Counter-Rotation | Standard |
| Upper Unit Gear Set | Precision Shimmed Assembly with Near-Net Forged Helical Gears |
| Lower Unit Gear Set | Precision Shimmed Assembly Forged Bevel Gears with Twin Counter Rotating Propshafts for Bravo Three |
| Propshaft Material | Heat-Treated Stainless Steel |
| Standard Exhaust Outlet | Through Propeller |
| Required Propeller Hub | Rubber Hub |
| Recommended Lubricant | Mercury High-Performance Gear Lube |
| Monitoring System | Engine-Mounted Lube Monitor w/Audio Warning or Engine Guardian® |
| Corrosion Warranty | 3-Year, Limited |
| Housing Construction | Corrosion Resistant XK 360 Aluminum Low-Copper Alloy |
| Corrosion Protection | Tri-Paint, Anodes & MerCathode® Electronic Corrosion Prevention |
| Anode Type | Ultra-Pure Aluminum Anodes or Magnesium Anode Kit |
| Speedometer Pick-up | Integrated Into Lower Housing, Digital Output Optional |
| Steering System | Single Cylinder Power Steering with Anti-Feedback |
| Steering Range | 56° Range Stop to Stop, Digital Output Optional |
| U-Joint Type | Permalube® Virtually Maintenance-Free |
| Power Trim System | Twin-Cylinder Hydraulic Featuring Power Trim XD® Kick-up Return |
| Typical Trim Range | -5° to 11° |
| Trim Limit Switch | Adjustable Limit Analog or Digital - Engine Dependent |
| Trailer Limit | 46° |
| Trim Hinge Pin Design | Permanently Lubricated - No Maintenance Required |
| Hydraulic Trim Lines | Stainless Steel Braided Armor |
| Drive Coupler | Grease-able From Inside Boat |
| Drive Weight | 137 lbs. (62 kg) |
Warranty Information
Mercury Marine & Quicksilver products carry a 1 year factory warranty against defects and workmanship. Serialized items such as engines, drives, and transom assemblies must be installed by a dealer for warranty to be valid.
View AllClose