New OEM MerCruiser 135 HP TKS 3.0 engine!
This engine is complete and ready to be dropped in and started!
If replacing an engine older that 2006, you will need a harness adapter.
Per EPA Regulations:
- Complete core required before shipping. (Customer is responsible for freight to our NJ store)
- Only for boats older than 2010
- Customer must provide Hull ID #
3 year Warranty is only valid if installed by a MerCruiser dealer!
Must ship to a commercial address with a dock or fork lift
|Full Throttle Range||4400 - 4800 RPM|
|Bore & Stroke||4.00" X 3.60" (101mm X 91mm)|
|Fuel Requirement||87 Octane (R+M)/2|
|Fuel System||2V Carb with Turn Key Start & Mechanical Fuel Pump|
|Induction System||Single Piece Iron Intake-Exhaust Manifold|
|Ignition System||EST Analog with Distributor|
|Charging System||65 Amp/917 Watt Alternator|
|Water Drain System||Quick-Disconnect Drain Hoses with Flush Feature|
|Exhaust System||Iron Manifold with EDP Coating|
|Cooling System||Thermostatically Controlled, Raw Water|
|Accessory Drive System||V-Belt|
|Recommended Engine Oil||Mercury MerCruiser Full-Synthetic Engine Oil, 20W-40, NMMC FC-W rated|
|Engine Guardian System||Low Oil Pressure, High Coolant Temperature, Low Drive Lube|
|Alpha Ratios||2.0, 2.40(H)|
|Dimensions (LxWxH) in||29 x 26 x 21|
|Dimensions (LxWxH) mm||730 x 660 x 533|
|Weight w/ Alpha (lbs./kg)||635/288|
|Optional Freshwater Cooling||Available|