Marine Navigation & Equipment

Micro Field-Attachable ConnectorField-attachable connectors allows you to make field connections to bulk cable. The color-coded screw terminals match the individual wire colors found within the bulk cable for error-free field installation.Color-coded...

TotalScan/StructureScan 3D Replacement BracketReplacement bracket for TotalScan & StructureScan 3D Transom Mount TransducersHardware included Product : NAVICO TOTALSCAN REPLACEMENT BRACKET Manufacturer : NAVICO Manufacturer Part No : 000-13522-001 UPC...

8-Pin Transducer to 12-Pin Sounder Adapter Cable w/XIDUse this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device. Product : GARMIN 8 TO 12 PIN TRANSDUCER ADAPTER Manufacturer : GARMIN Manufacturer...

NMEA 2000 terminator - female Product : GARMIN NMEA 2000 TERMINATOR FEMALE Manufacturer : GARMIN Manufacturer Part No : 010-11081-00 UPC : 753759078171

NMEA 2000 terminator - male Product : GARMIN NMEA 2000 TERMINATOR MALE Manufacturer : GARMIN Manufacturer Part No : 010-11080-00 UPC : 753759078164

Transducer Spray ShieldGarmin's transducer spray shield is available for Garmin side scanning transducers.Mounting hardware included. Product : GARMIN TRANSDUCER SPRAY SHIELD Manufacturer : GARMIN Manufacturer Part No : 010-12406-00 UPC : 753759148256

Axiom 7 Surface Mount Suncover - 7"Suncover for Axiom 7 when Rear Mounted (Surface) Product : RAYMARINE AXIOM 7" SUNCOVER WHEN SURFACE MOUNTED Manufacturer : RAYMARINE Manufacturer Part No : R70527 UPC : 723193818367

HRP17-24 Hydraulic Reversing Pump Unit 24 VDCThe Accu-Steer HRP Series pump sets are designed to interface hydraulic steering systems with autopilot and electric steering controls. The output flow from the pump set determines the speed of the rudder...

AISLink CB1 Class B AIS Transceiver**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI registration or FCC Ship Station License is...

117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.For use with:B117 B150 B744V B744VL B765C SS555 Product :...

117WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze and stainless steel housings (P617V, B617V, SS617V)...